- Air sealing first. Top plates, penetrations, chases and fixtures sealed before any material goes down.
- Baffles at every eave bay. Protects soffit airflow and lets us carry insulation fully to the exterior wall.
- The attic hatch built up, insulated and weather stripped, treated as part of the building envelope.
- Ventilation assessed and corrected so intake and exhaust are balanced.
- Insulation installed to your jurisdiction’s requirement, at even depth, and documented.
- Depth gauges installed. Code calls for one per 300 square feet. We install roughly double that, so the depth is obvious to you and to anyone who ever goes up there.
Blown In Attic Insulation in Boulder, Westminster, Golden and the Front Range
Most attics on the Front Range were insulated once, when the house was built, and never touched again. We open a hatch and find four to ten inches of settled material, no baffles, bare framing at the edges, and peaks and valleys where somebody walked through it years ago. The hatch itself is usually a sheet of plywood with nothing on top of it.
That attic is not performing at half its rated value. It is performing at whatever the air leaks underneath it allow.
Koala Insulation of Boulder brings attics up to the insulation level your jurisdiction actually requires, installed as a complete job rather than a top off. Three certified BPI analysts on staff. Over 340 five star reviews.


A Superior
“Blow and Go”, or Do It Right

These capabilities define the insulation type:
Advantages Of
Blown-In Insulation for Homes in Boulder
Between high-altitude sun and chinook winds, homes in Boulder work hard to stay comfortable. Blown-in insulation helps by installing quickly, topping off existing layers, and supporting lower energy costs with year-round comfort. Additional advantages include:
Because our crews air-seal key attic leaks before blowing insulation, the upgrade also helps keep dust, pollen, and other outdoor pollutants from sneaking into the living spaces of your Boulder home through ceiling penetrations.
The blown-in products we install are designed with fire safety in mind. Proper installation around recessed lights, chimneys, and other heat sources is critical, and our team follows local codes and manufacturer guidelines to help keep your Boulder home safe.
Pest deterrence is a real, if lesser-known, benefit: cellulose blown-in insulation (uniquely among loose-fill options) is treated with compounds that discourage insect nesting, and air sealing the attic closes off the gaps pests use to get into homes in Boulder.
Beyond temperature, there is peace and quiet. Loose-fill insulation absorbs airborne sound, taking the edge off busy roads, barking dogs, and the thump of upstairs rooms so your home in Boulder feels calmer.
Made largely from recycled materials, blown-in insulation is one of the greenest upgrades your Boulder home can get. It cuts the energy needed for heating and cooling (by up to 40% in some studies), lowering both utility bills and carbon footprint.
Our Straightforward 4-Step
Blown-In Insulation Process

Free Home Efficiency Assessment
- Prep for Safe InstallationEvery blown-in insulation project in Boulder starts with careful preparation. We protect floors and walkways, set up safe access to the attic, and install rulers or depth markers so we can confirm the final insulation level across the entire space. If needed, we will install baffles at the eaves to maintain ventilation and keep insulation from blocking soffit vents.
Koala Difference: The payoff: insulation that performs as designed, and your Boulder home left exactly as clean as we found it.
- Seal Key Leaks & Set Up EquipmentBefore blowing in insulation, our team addresses the air leaks common to homes in Boulder: plumbing penetrations, wiring, recessed lights, attic access points, and other leaks detected by our thermography leak detection system.
Koala Difference: Pairing air sealing with the blow-in is how we turn a good upgrade into a great one for your Boulder home.
- Blow In & Level the InsulationThen comes the main event: loose-fill is blown across the attic to the target depth and R-value. Corners, eaves, and the hard-to-reach pockets typical of homes in Boulder get deliberate attention, and we keep verifying against the depth markers until the whole space reads level.
Koala Difference: Coverage is everything. We take the time to verify depth and consistency so your Boulder home is not left with “thin spots” that reduce performance.
- Cleanup, Photos & Walkthrough
Once the target depth is confirmed, we vacuum the work area, pack out all equipment, and verify the attic access is sealed tight. Then we walk you through the project at your Boulder home, share before-and-after photos when available, and answer any questions about your new insulation.
Koala Difference: Our job does not end when the blower shuts off. Koala Insulation of Boulder is here for future questions, and to help you take advantage of any available rebates or tax credits.
Let’s make your Boulder home the most comfortable house on the block. Book a free quote with Koala Insulation of Boulder today!
In 5 Easy Steps

Enhanced Comfort
Stay cozy inside, no matter the weather outside.

Energy Savings
Save on your energy bills while keeping your home comfy all year.
Reduced Noise
We use top-quality insulation to give you lasting results.

Eco Friendly
Choose insulation that’s better for your home and the planet, such as solar-powered attic fans.
Your Satisfaction is
Our Top Priority
But do not take it from us: hear what clients in Boulder say about their experience with our insulation team.
Serving Boulder and the Front Range with Expert Blown-In Attic Insulation
What Makes
Koala Different?

CCEF Approved Contractor
Koala Insulation of Boulder is an approved contractor with the Colorado Clean Energy Fund. That means our customers can finance insulation work through RENU loans and ClearPath On-Bill financing, with terms built specifically for energy efficiency improvements rather than a generic home improvement loan.
Not every insulation contractor in Colorado carries this approval. Ask us about it on your estimate and we will walk you through what you qualify for.
Limited Lifetime Warranty
Our work carries a limited lifetime warranty. In practice it is simpler than that sounds. If we did the work on your home and something is not right, you call us and we come back and fix it. No claim forms, no argument about what is covered.
Three Certified BPI Analysts on Staff
The Building Performance Institute certifies professionals to assess how a home performs as a complete system: air leakage, insulation, ventilation, moisture and combustion safety. Most insulation companies do not employ a single certified analyst. We have three.
It is the difference between someone who can install insulation and someone who can tell you why your house is uncomfortable in the first place.

Let’s make your Boulder home the most comfortable house on the block. Book a free quote with Koala Insulation of Boulder today!
Frequently Asked Questions
Your Blown-In Insulation Questions, Answered
Get all your questions answered by our local experts. If we didn’t address your question here, give us a call at (720) 738-7825 or schedule a free quote today!
What Does Blown-In Insulation Cost in Boulder?
Blown-in insulation is one of the more affordable ways to upgrade home comfort, and the final investment comes down to a handful of factors.
The biggest factors include:
- The size of your home: More attic square footage means more material and more installation time.
- The type of insulation used: Materials like cellulose and fiberglass are priced differently.
- The level of effort involved: Attic access, prep work, air sealing, and any old insulation removal all shape the scope.
The good news is that the investment pays you back through steadier comfort and lower heating and cooling costs season after season.
Rebates from state and local governments and from many utilities can also help take a bite out of the total, and our team can point you toward what may be available. Every home in Boulder is unique. For an accurate estimate tailored to your property and goals, contact the team today to schedule a free assessment.
Is Blown-In Insulation Better Than Rolls (Batts)?
For attics, blown-in usually wins. Loose-fill flows around joists, wiring, and pipes to form one continuous blanket, while rolls (batts) tend to leave small gaps at edges and obstructions. In attics in Boulder, those little gaps add up to drafts, uneven rooms, and performance below the rating on the package.

How Much Blown-In Insulation Do I Need?
The right amount comes down to three inputs: the square footage of the space, the insulation depth required, and where you live (see the map below). Climate drives the recommended attic R-value, with colder regions needing thicker insulation to slow heat loss and warmer regions needing enough depth to block heat gain. Attic size and target R-value together set how much material consistent coverage requires. Boulder falls in IECC Climate Zone 5B (cold), where DOE and ENERGY STAR guidance calls for attic insulation of roughly R-38 to R-60.
That is why professional installers do not eyeball it: material calculations follow climate-zone guidelines, current insulation levels, and manufacturer coverage charts. Done right, the depth matches the recommended R-value for your area, allows for natural settling, and leaves no thin spots to drag down performance. The diagram below illustrates how recommended attic insulation levels shift by region, a quick way to see why needs differ from one location to the next.

Insulation Education
Learn why insulation is critical to your home’s energy efficiency and your family’s comfort.
Get a quote










