Give your home an upgrade with blown in cellulose or fiberglass attic insulation and experience savings, good health, and home value!
Blown-in insulation fills every nook and cranny of the attic and creates an extra fluffy layer of effective insulation. It is a convenient choice that can be blown in over existing insulation or in between walls and ceiling joists without disturbing structures. Loose-fill fiberglass or cellulose can be blown on your attic floor, between walls, or other spaces that may require insulation. Blown-in insulation can easily cover large areas and will fill in areas with tight spaces and angles. Koala Insulation of Northwest Austin installs blown-in for retrofit, residential, commercial, and new build construction.
We’ll make your space more comfortable
Lower energy bills
Insulation can lower energy bills substantially. The U.S. Department of Energy estimates that 56% of the energy used in a home goes to heating and cooling. Let us give you reduced monthly costs!
Reduce outside noise
New insulation will lessen outside, unwanted noises, giving you a better night’s rest. Let us give you silence!
Blown-in Insulation is very cost effective and allows you to get better comfort and lower monthly costs at an affordable price point. Blown In insulation is a no brainer as a homeowner. Let us help you save on the upfront costs!
Reduced carbon footprint
By reducing energy waste, you're helping the environment. Let us help you do your part for a brighter tomorrow!
Pays for itself over time
By saving on your electricity bill each month, your insulation upgrade will pay for itself over time and you’ll save money for years to come . Let us give you a return on your investment!
COMMON Blown In Attic APPLICATIONS
We work with homeowners and contractors to install Blown In Attic insulation in homes, commercial and industrial applications!
- Between Floors
- Apartments Complex
- Retail Spaces
- Education Centers
- Medical Facilities
Why Choose Koala?
We get there on time, every time.
No mess left behind! We clean up after ourselves.
We have 15+ years of experience in construction and home services.
We’ll help you choose the right insulation for your project.
See what our satisfied customers have to say about our blown in service!
They installed attic Insulation and Also a roof fan. I highly recommended to anyone needing to get theirs done. Definitely will be using again for other parts of the house as well.
Very pleased. Would recommend to anyone that needs a good company for blown in insulation. Very professional. Arrived on time. Cleaned up afterwards. Folks were courteous and answered all my questions.
The Team at Koala Insulation provided an amazing service and deal for my attic insulation job which added additional R19 to my existing attic insulation. The team was on time and got to work immediately.
Just had David and his team do blown-in in our house and the service and install was the best. They were neat clean and right away notice a huge difference in our electric bill along with overhead noise from outside from airplanes....so happy with this investment to our home!
The Koala crew did a great job. The insulation job was promptly scheduled and reasonably priced. The additional insulation should reduce my electric bill. My house needed missing insulation to be reinstalled. Jeff, and the crew were professional and super nice to deal with. Thank you so very much.
When it comes to blown-in insulation, you have two primary choices: Cellulose and Fiberglass. Learn more with our videos below!
Cellulose consists of fibers made from recycled newspaper, cardboard, or wood and is made with or without binders. Cellulose is a very common type of blown-in insulation as it is made from recycled materials and is chemically treated to resist pests, mold, and fire. Boric acid is the primary chemical used to treat Cellulose insulation and is found naturally in seawater, fruits, and plants.
Fiberglass is made from plastic, glass, and other raw materials that are melted and spun into fibers that resemble the texture of wool. Fiberglass insulation has moisture and fire-resistant properties. Because fiberglass is made from sand and glass, it is naturally non-combustible. Fiberglass has significant recycled content with some loose-fill products containing up to 80% recycled glass.
Increasing the R-value of your insulation may help you to money on energy bills and maximize the energy efficiency of your home. Blown-in insulation is a environmentally conscious, cost effective way to increase your attic’s insulation, which in turn may help lower your cooling and heating bills. For maximum energy efficiency, we recommend a powerful combination of insulation and proper air sealing. This can help eliminate air leaks that pass through recessed light fixtures, plumbing areas, and duct work.
Blown-in insulation slows heat transfer from your attic to the lower levels of your home during the hot summer and works hard to keep the warm air inside your home during the cold winter months. The attic is the main location where heat enters and exits the home, making it difficult to keep your home temperatures consistent. Proper insulation can target reducing heat transfer while also allowing your HVAC system to increase its performance.
One of the many positive benefits Blown-in insulation has is that it is environmentally friendly. Not only does it improve the energy efficiency of your home, but it also helps protect the environment.
Cellulose is made up of 80% recycled materials, with the remaining consisting of non-toxic borate solution. This solution gives the insulation a Class-1 fire safety rating and makes it mold and pest resistant. Certain fiberglass products can contain up to 80% recycled glass products and is non-combustible.
Blown-in insulation not only protects your home from energy loss, butal so helps reduce emissions associated with heating and cooling equipment. For those home owners who are looking for economical ways to reduce their environmental impact, curb energy waste, and increase the comfort of your home, blown-in insulation may be the solution for you!
Blown-in insulation provides a dense, effective barrier against heating/cooling loss or gain, and it provides an affordable R-value per inch. “R” means resistance to heat flow. The higher the R-value, the greater the insulating power.
Dense-packed cellulose or fiberglass insulation blocks the bulk of air movement and has a higher R-value per inch than insulation installed at a lower density. Attics can accommodate a deep layer of insulation, as much as 16 to 26 inches, making the resistance to heat flow even higher by installing blown-in insulation.
Fiberglass blown-in insulation is a loose material which allows the installation amount to be customized according to your local energy efficiency recommendations. Depending on which climate zone you live in, you may need a higher R-value. The higher the R-value, the more it will decrease air flow and help you conserve energy.
When it comes to insulating your home, R-value matters.
Need Project Financing
Pay for your project with predictable, monthly payments without tapping into your home equity.
Read More of Our Reviews
Couldn’t be more pleased! Punctual and very professional. Completed the job on time and did a great tidying up afterwards !
I was extremely please with the level of professionalism of the Koala team. The work was exceptional from start to finish. I've already recommended them to two of my friends who are looking to upgrade their homes!
I acquired a total of four quotes for the insulation
I acquired a total of four quotes for the insulation of Closed Cell Foam for my home crawl space. Lisa King with Koala Insulation of Northwest Austin submitted the lowest quote and was awarded the job. It's common knowledge that there are supply shortages for almost anything these days. Closed Cell Insulation falls deeply in the supply shortage category. Delays are discouraging when it gets in the way of completing a long remodeling project. The General Manager; Brett Wright kept me updated with tentative installation dates and never left me in a wondering state while waiting. When the day came for the installation, the Koala Insulation crew was on time and Brett was there to explain the process. The installers were courteous and proficient with preparation. They went out of there way to cover and protect everything that didn't need to be in contact of the spray. When they competed the job, they left the area in great shape and there were no trace of them being there. The results of the Close Cell application was better than expected. My temperature is now 1-2 degrees between my two floors. Prior to the application, the temperature difference was between 9-11 degrees. I give them 7 Stars *******. Thanks Koala Insulation of Northwest Austin!!!!!
We Provide Insulation Services to the Following Northwest Austin Areas
Cedar Park, Austin, Round Rock, Florence, Bertram, Bluffton, Buchanan Dam, Burnet, Kingsland, Leander, Liberty Hill, Marble Falls, Horsehoe Bay, Spicewood, Tow
Williamson County, Travis County, Burnet County, Llano County
78703, 78705, 78712, 78722, 78730, 78731, 78746, 78751, 78752, 78756, 78757, 78613, 78717, 78726, 78729, 78732, 78750, 76527, 78605, 78607, 78609, 78611, 78639, 78641, 78642, 78645, 78654, 78657, 78669, 78672, 78734, 78664, 78665, 78681, 78728